Classified Ads

$95,000 • Professionally built in South Florida. Off field landing in 2009, unfortunately the recovery team cut wings to remove the aircraft from the field. Nice interior, bubble canopy, and STec 60-2 AP. Damage: wings cut and some fuselage damage. Includes new landing gear trunnions, new wing kit, and steel wing jig. All mods and SBs completed. Cruise 245kts IAS at 16gph. All Logbooks since new. Have all the parts to complete the rebuild just don’t have the time.
TTSN 756, New Full Garmin Glass panel and AP, All Modifications and upgrades $ 300,000 OBO. Call Heinz (386) 334 9449 hpeier@cfl.rr.com
Danny Clisham, Owner (734) 730-2599 TTAF&E: 342.1 NO DAMAGE HISTORY This aircraft is in the final stages of total refurbishment. It was completely disassembled almost to the point of being down to rivets. Essentially the only parts that remained in the fuselage were good control cables and aluminum hydraulic lines. All parts were stripped of old paint (including the engine mount) and properly prepared for new finish. The following is a partial list of work completed:
Cruise +240kts with this SX300 kit - prop/spinner included. Main & Nose landing gear is installed and manually cycles, wing is complete, but needs some re-riveting from previous builder work. Control surfaces completed. Most mods completed, including firewall pedal extension for leg room. Hard hydraulic lines installed. New UV-blocking bubble canopy included. Fuselage is completely re-riveted due to original builder using cherry-max. Builder is an active member of the SX300Group and is selling because I don’t have time to build a second SX.